Refurbished Jura ENA Micro 9 – one-touch cappuccino from a 23 cm-wide machine
The Jura ENA Micro 9 One Touch squeezes a Fine Foam Frother into the 23 cm ENA Micro body, so cappuccino and latte macchiato are a single press even on the narrowest bench. It shares the micro brewing unit and Aroma+ grinder with the Micro 1, adds a height-adjustable milk spout for tall glasses, and rinses the milk system automatically.
Refurbished, it's the best small-kitchen milk-drink Jura for the money. Ours are resealed, descaled, grinder-serviced, frother-rebuilt and tested, with a 12-month parts and labour warranty from our Melbourne workshop.
Apartments, couples, caravans and small offices where a milk drink at the press of a button matters but space is tight.
For a modern equivalent with flat white and P.E.P., see the ENA 8; for more capacity, the E8.
Key features
- One Touch cappuccino and latte macchiato
- Only 23 cm wide
- Fine Foam Frother with height-adjustable spout
- Micro brewing unit with pre-brew aroma
- Aroma+ grinder
- Automatic milk-system rinse
- Automatic clean and descale programmes
Specifications
Jura ENA Micro 9 One Touch
Compact fully automatic bean-to-cup (One Touch milk)
Small kitchens that want one-touch milk drinks
Micro brewing unit with Intelligent Pre-Brew Aroma System
Fine Foam Frother (One Touch)
Text display with rotary selector
Dimensions W x H x D (mm)
230 × 323 × 445
Automatic rinse, cleaning, descaling and milk-system programmes
Micro Silver (as pictured)
What's in the box
- Jura ENA Micro 9 machine, fully serviced and bench-tested
- Water tank, drip tray and coffee-grounds container
- Milk frother / milk pipe (milk container not included unless pictured)
- Ground-coffee measuring spoon (for the bypass chute)
- Power lead (Australian plug)
- Printed quick-start card + link to the full Jura manual
- 12-month Chameleon Coffee parts & labour warranty certificate
Our refurbishment notes
Every machine goes across the bench and gets the same work before it is listed.
Replaced as standard. The brew unit is replaced. Every seal and O-ring in the machine is renewed, pump seals included. The steam assembly is completely refitted with all of its seals replaced.
Pressure tested, and replaced if it fails. The pumps are resealed and pressure tested, and replaced if they are not performing — either way the machine leaves here pumping properly. The ceramic valve is pressure tested and replaced if it does not hold. Every sensor is checked for correct resistance and replaced if the reading is out. The grinder is recalibrated and its brushes renewed, and if extraction still is not where it should be, the grinder itself is replaced.
Stripped and cleaned. Boilers are descaled and flushed. The water circuit and flow control are stripped and cleared of any debris. The whole system is flushed through, and the machine is cleaned and vacuumed out inside and out.
Then it is run and tested with real coffee before we sign it off.
One honest note about that: you may find a few coffee grounds in the machine when it arrives. A little always stays in the hopper channel through testing and transport. It is not a sign the machine was not cleaned — it is a sign it was tested.
Cosmetic condition. These are used machines and some of them look it. Expect scuffs, light scratches and general wear on the casing, panel and drip tray. Before your machine ships we photograph the actual unit you are buying, marks and all, and send you a short video of it running. What you see is what arrives.
