Refurbished Jura ENA Micro 1 / A1 – espresso and long black from a 23 cm-wide machine
The Jura ENA Micro 1 (and its successor the A1) is Jura distilled to the essentials: a conical grinder, a micro brewing unit and three black-coffee programmes in a body just 23 cm wide. No milk system, no menu to learn – ristretto, espresso or coffee, and a two-cup button. It is the smallest, simplest Jura made.
Refurbished, it's the cheapest way to replace a pod machine with fresh-ground coffee. Ours are resealed, descaled, grinder-serviced and tested, with a 12-month parts and labour warranty from our Melbourne workshop.
Black-coffee drinkers, small offices that just want espresso, and anyone with a narrow bench or a desk-side setup.
If you ever want milk drinks, choose the ENA Micro 9 (same footprint, One Touch milk) or the ENA 8.
Key features
- Just 23 cm wide – the smallest Jura
- Ristretto, espresso and coffee at the press of a button
- Micro brewing unit with pre-brew aroma (A1 adds P.E.P.)
- Conical grinder with adjustable fineness
- Two-cup function
- 1.1 L tank and 125 g hopper
- Automatic rinse, clean and descale programmes
Specifications
ENA Micro / A-Line (compact)
Compact fully automatic bean-to-cup – black coffee only
Espresso and long-black drinkers with very little bench space
Aroma+ / Aroma G3 conical grinder
Micro brewing unit with Intelligent Pre-Brew Aroma System (A1: P.E.P.)
Symbol display with buttons / rotary
Dimensions W x H x D (mm)
230 × 323 × 445
CLARIS Blue / CLARIS Smart (A1)
Automatic rinse, cleaning and descaling programmes
Micro Black / Piano Black / White (as pictured)
What's in the box
- Jura ENA Micro 1 / A1 machine, fully serviced and bench-tested
- Water tank, drip tray and coffee-grounds container
- Ground-coffee measuring spoon (for the bypass chute)
- Power lead (Australian plug)
- Printed quick-start card + link to the full Jura manual
- 12-month Chameleon Coffee parts & labour warranty certificate
Our refurbishment notes
Every machine goes across the bench and gets the same work before it is listed.
Replaced as standard. The brew unit is replaced. Every seal and O-ring in the machine is renewed, pump seals included. The steam assembly is completely refitted with all of its seals replaced.
Pressure tested, and replaced if it fails. The pumps are resealed and pressure tested, and replaced if they are not performing — either way the machine leaves here pumping properly. The ceramic valve is pressure tested and replaced if it does not hold. Every sensor is checked for correct resistance and replaced if the reading is out. The grinder is recalibrated and its brushes renewed, and if extraction still is not where it should be, the grinder itself is replaced.
Stripped and cleaned. Boilers are descaled and flushed. The water circuit and flow control are stripped and cleared of any debris. The whole system is flushed through, and the machine is cleaned and vacuumed out inside and out.
Then it is run and tested with real coffee before we sign it off.
One honest note about that: you may find a few coffee grounds in the machine when it arrives. A little always stays in the hopper channel through testing and transport. It is not a sign the machine was not cleaned — it is a sign it was tested.
Cosmetic condition. These are used machines and some of them look it. Expect scuffs, light scratches and general wear on the casing, panel and drip tray. Before your machine ships we photograph the actual unit you are buying, marks and all, and send you a short video of it running. What you see is what arrives.
