Refurbished Jura Impressa J9 – One Touch cappuccino from Jura's classic J-Line
The Jura Impressa J9 One Touch was the machine that brought single-press cappuccino to Jura's mid-range: a 2.1 L tank, 250 g hopper, TFT display with Rotary Switch and an automatic frother for cappuccino and latte macchiato. It's a quiet, solid machine that many owners have run for a decade.
Refurbished, it's one of the least expensive routes into a genuine Jura. Ours get a new brew-group seal kit, drainage valve, descale, grinder service and frother rebuild, then a full test, with a 12-month parts and labour warranty.
First-time bean-to-cup buyers, couples and small households that want proper milk drinks without spending E8 money. Also suits a small office where a simple menu is a plus.
If you want a flat white programme, current-generation extraction and app control, step up to the E8.
Key features
- One Touch cappuccino and latte macchiato
- 2.1 L water tank and 250 g bean hopper
- Colour TFT display with Rotary Switch
- Height-adjustable milk and coffee spouts (up to 153 mm)
- Aroma+ grinder with adjustable fineness
- Intelligent Pre-Brew Aroma System
- Automatic rinse, clean and descale programmes
Specifications
Jura Impressa J9 One Touch
Fully automatic bean-to-cup (One Touch)
Households that want One Touch milk drinks on a budget
Variable brewing unit with Intelligent Pre-Brew Aroma System
Automatic milk frother (One Touch)
TFT display with Rotary Switch
Dimensions W x H x D (mm)
310 × 345 × 440
Automatic rinse, cleaning and descaling programmes
Piano Black / Brilliant Silver (as pictured)
What's in the box
- Jura Impressa J9 machine, fully serviced and bench-tested
- Water tank, drip tray and coffee-grounds container
- Milk frother / milk pipe (milk container not included unless pictured)
- Ground-coffee measuring spoon (for the bypass chute)
- Power lead (Australian plug)
- Printed quick-start card + link to the full Jura manual
- 12-month Chameleon Coffee parts & labour warranty certificate
Our refurbishment notes
Every machine goes across the bench and gets the same work before it is listed.
Replaced as standard. The brew unit is replaced. Every seal and O-ring in the machine is renewed, pump seals included. The steam assembly is completely refitted with all of its seals replaced.
Pressure tested, and replaced if it fails. The pumps are resealed and pressure tested, and replaced if they are not performing — either way the machine leaves here pumping properly. The ceramic valve is pressure tested and replaced if it does not hold. Every sensor is checked for correct resistance and replaced if the reading is out. The grinder is recalibrated and its brushes renewed, and if extraction still is not where it should be, the grinder itself is replaced.
Stripped and cleaned. Boilers are descaled and flushed. The water circuit and flow control are stripped and cleared of any debris. The whole system is flushed through, and the machine is cleaned and vacuumed out inside and out.
Then it is run and tested with real coffee before we sign it off.
One honest note about that: you may find a few coffee grounds in the machine when it arrives. A little always stays in the hopper channel through testing and transport. It is not a sign the machine was not cleaned — it is a sign it was tested.
Cosmetic condition. These are used machines and some of them look it. Expect scuffs, light scratches and general wear on the casing, panel and drip tray. Before your machine ships we photograph the actual unit you are buying, marks and all, and send you a short video of it running. What you see is what arrives.
